HomeRegisterLog in

Share | 
 

 CrusherGT500 It's Ready!!!

View previous topic View next topic Go down 
Go to page : Previous  1 ... 8 ... 13, 14, 15  Next
AuthorMessage
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 7:39 pm

sfadchi wrote:
Often imitated, but never replicated!


I wouldn't want to copy your shit, cuz tha shit blew up twice! So stay home puss and be good to ur wife u clown. Jerkit
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 8:00 pm

peacockpirate wrote:
i'm really dissapointed. I was expecting more from frank. hope to see the vids but if trc recorded it won't there be an issue w/ it going on the boards or is all that squashed?


I appreciate your support despite of all the BS and haters tha will love to see me not succeed on anything i do... My message to them is, I never give up, i never sleep and i always come back stronger to prove my point across.


Here is my failure last night, and i thought i hit the revlimiter around 6800 on 4th and let off, but i know my tuner setup my revmiter at 7k so i was hold on! tha can't be right and in fact the car went on lean mode instead, i didn't realize it till i was about to race the Zl1 tha the check engine came on and the car wouldn't accelerate pass 2k-RPMS ,I pulled over and plugged in the predator and I had two codes>> System to lean bank1 and system to lean Bank 2. And here is why..






Guys Keep in mind tha I am still working on the car and i need bigger injectors to keep going... The car was not at its full potential last night and it wont be for another month or so till my tuner comes back down to fix the bugs out the tune. I installed the bigger 3.75 pulley last night before i raced the GTR. The car was tuned on a 3.5 pulley and it was making way to much boost that wasn't needed with just 14degrees of timing.. I am not going to say what the car made on the 3.5 pulley, But i sure dont have no fucking clue what the car it's making on the 3.75 pulley now I am guessing around 750whp max. IJS. I am still going to race everyone regardless of the outcome win or lose.

Back to top Go down
alberth@ad-turbo.com
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 812
Location : miami
Registration date : 2009-06-29

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 8:22 pm

U should look into a real fuel hose and not that cheap discount rubber hose
Back to top Go down
http://AD-TURBO.COM
V6Chris
STREET LEGEND
STREET LEGEND
avatar

Number of posts : 5188
Age : 28
Location : In front of you
Registration date : 2009-01-30

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 8:28 pm

[You must be registered and logged in to see this link.] wrote:
U should look into a real fuel hose and not that cheap discount rubber hose

cant tell you how many times ive seen that mod done on returnless fuel setups and all split. you need the plastic flex like factory or a real setup. E85 is not gonna let that shit fly frank...

you think that i'am trying to make fun of you and what not frank, you do that all on your own. your setup has potential you just dont know where its at or how to use it
Back to top Go down
http://www.crtperformance.webs.com
V6Chris
STREET LEGEND
STREET LEGEND
avatar

Number of posts : 5188
Age : 28
Location : In front of you
Registration date : 2009-01-30

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 8:29 pm

regardless the potential it wont be what you want or need tho Frank. shoulda got alberths s2k when you had the chance[b]
Back to top Go down
http://www.crtperformance.webs.com
Jspec Mk4
STREET KING
STREET KING
avatar

Number of posts : 1588
Age : 26
Registration date : 2009-07-08

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 9:04 pm

how much u said u payed for that fuel set up lol???
Back to top Go down
NoPis10
Intermidate Street Racer
Intermidate Street Racer
avatar

Number of posts : 200
Location : Boostville
Registration date : 2010-01-16

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 9:19 pm

gsr interga wrote:
how much u said u payed for that fuel set up lol???

1 MILLION dollars... mauh muah muah
Back to top Go down
26brx8
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 619
Registration date : 2010-08-13

PostSubject: Re: CrusherGT500 It's Ready!!!   August 10th 2012, 11:11 pm

Frank ...this is what you need.
16in long ----$25 each
let me know
I have 10 of these.



[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 12:26 am

V6Chris wrote:
alberth@ad-turbo.com wrote:
U should look into a real fuel hose and not that cheap discount rubber hose

cant tell you how many times ive seen that mod done on returnless fuel setups and all split. you need the plastic flex like factory or a real setup. E85 is not gonna let that shit fly frank...

you think that i'am trying to make fun of you and what not frank, you do that all on your own. your setup has potential you just dont know where its at or how to use it


V6chris, It's not a returnless fuel system, I noticed you keep saying returnless, It's A RETURN STYLE FUEL SYSTEM... The kit came with those cheap thin hoses. I realized tha shit to late. Picked up some good fuel injection one from Discount Albert. Way better than tha pos i received with the kit.


Last edited by TheCrusherCobra on August 11th 2012, 12:29 am; edited 1 time in total
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 12:28 am

[quote="26brx8"]Frank ...this is what you need.
16in long ----$25 each
let me know
I have 10 of these.




Thats some good shit, But i only need abuout 6 inches for all three pumps. lol
Back to top Go down
26brx8
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 619
Registration date : 2010-08-13

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 2:35 am

they can not be cut.... but this is the best out there , oem e85 graded.
you can bend them 360degrees without loosing flow or having any body deformation.
Back to top Go down
sfadchi
Newbie
Newbie
avatar

Number of posts : 53
Registration date : 2010-01-05

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 1:47 pm

Hummm... E85, Whipple 4.0L, Triple pump return style fuel system. I alway knew you were my biggest fan. It's too bad you can put he damn thing together right and can't drive it worth a shit!
Back to top Go down
FRC
Newbie
Newbie


Number of posts : 65
Registration date : 2010-11-08

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 2:17 pm

sfadchi wrote:
Hummm... E85, Whipple 4.0L, Triple pump return style fuel system. I alway knew you were my biggest fan. It's too bad you can put he damn thing together right and can't drive it worth a shit!

If he copied your setup, then he should be close to the power you made. But I'm sure he fucked up somewhere.

Back to top Go down
Desarro
Newbie
Newbie
avatar

Number of posts : 74
Registration date : 2009-08-20

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 6:21 pm

A lot people hating on Frank's car but how many people in this thread actually have something faster? I'm sure when he gets the car right it will be much faster.
Back to top Go down
V6Chris
STREET LEGEND
STREET LEGEND
avatar

Number of posts : 5188
Age : 28
Location : In front of you
Registration date : 2009-01-30

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 6:32 pm

sfadchi wrote:
Hummm... E85, Whipple 4.0L, Triple pump return style fuel system. I alway knew you were my biggest fan. It's too bad you can put he damn thing together right and can't drive it worth a shit!

hey get a new 5.0 and go 8s. then right a small description about the car...i wanna see frank buy a 5.0 after the shelby and just keep recycling copied cars.
Back to top Go down
http://www.crtperformance.webs.com
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 8:16 pm

sfadchi wrote:
Hummm... E85, Whipple 4.0L, Triple pump return style fuel system. I alway knew you were my biggest fan. It's too bad you can put he damn thing together right and can't drive it worth a shit!


I am glad you keep track of what i do with my shit! lol You are my biggest fan too. lol! now go home and install a nitrous kit on your prius and bring it and try to beat my car with it, i am sure it would. LMAO



Later bitch.
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 8:18 pm

Desarro wrote:
A lot people hating on Frank's car but how many people in this thread actually have something faster? I'm sure when he gets the car right it will be much faster.


10+++ George Deos have a faster car than i do, It's just tha we have never seen it, and i think we never will.

lol!
Back to top Go down
92redhatch
Newbie
Newbie


Number of posts : 63
Registration date : 2011-06-02

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 8:36 pm

Track closed today. Sad
Back to top Go down
NoPis10
Intermidate Street Racer
Intermidate Street Racer
avatar

Number of posts : 200
Location : Boostville
Registration date : 2010-01-16

PostSubject: Re: CrusherGT500 It's Ready!!!   August 11th 2012, 9:57 pm

Desarro wrote:
A lot people hating on Frank's car but how many people in this thread actually have something faster? I'm sure when he gets the car right it will be much faster.

NOT hating.... Franks car maybe fast BUT his biggest problem is that his MOUTH is faster than his car.... That's the biggest reason everyone jumps on him when he loses....

If Frank conducted his self better like a grown man and a good sportsman then he would probably get more respect....

Just my .002...
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   October 22nd 2012, 2:02 pm

3,000 miles on the plugs on the new build, multiple Dyno passes, Track passes and hardcore racing and they still look like new... I still swapped them new since i took them out.

Back to top Go down
b20vtec king
Newbie
Newbie
avatar

Number of posts : 95
Registration date : 2012-04-19

PostSubject: Re: CrusherGT500 It's Ready!!!   October 25th 2012, 2:11 am

I doubt the Frank would come close to monstro ijs
Back to top Go down
richevo
Professional Street Racer
Professional Street Racer


Number of posts : 366
Registration date : 2010-12-06

PostSubject: Re: CrusherGT500 It's Ready!!!   October 25th 2012, 9:11 am

b20vtec king wrote:
I doubt the Frank would come close to monstro ijs
i wouldn't say that.. frank's car is moving hard
Back to top Go down
Guest
Guest



PostSubject: Re: CrusherGT500 It's Ready!!!   October 25th 2012, 9:54 am

b20vtec king wrote:
I doubt the Frank would come close to monstro ijs


The car fuel issues are fixed and done with! This will be the first time in history we will see a 750whp mustang pull on a 800+AWDHP GTR.

So ladies and gentlemen stick around for this one...

Cool

Back to top Go down
NoPis10
Intermidate Street Racer
Intermidate Street Racer
avatar

Number of posts : 200
Location : Boostville
Registration date : 2010-01-16

PostSubject: Re: CrusherGT500 It's Ready!!!   October 25th 2012, 4:39 pm

Frank PLEASE stop saying 750HP Shelby... We all know you are putting down more power than that..... Laughing

Just leave HP and weight numbers out of your post. It doen't matter when it comes to street racing... You run what you have and that's that....

Back to top Go down
26brx8
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 619
Registration date : 2010-08-13

PostSubject: Re: CrusherGT500 It's Ready!!!   October 25th 2012, 5:43 pm

who are you running frank.?
that gtr is making 600awhp

Back to top Go down
Sponsored content




PostSubject: Re: CrusherGT500 It's Ready!!!   

Back to top Go down
 
CrusherGT500 It's Ready!!!
View previous topic View next topic Back to top 
Page 14 of 15Go to page : Previous  1 ... 8 ... 13, 14, 15  Next
 Similar topics
-
» Silfverberg: I'm not ready for the NHL yet
» Comfortable Master Room ready to move in by 01 March 2011
» Bolt ready for another big season - starts in Rome on May 26
» Race Ready 20% Off
» KTM convert ready to downsize

Permissions in this forum:You cannot reply to topics in this forum
SOUTHERN KNIGHTS :: RACING :: The Streets-
Jump to: