HomeRegisterLog in

Share | 
 

 90 mustang

Go down 
AuthorMessage
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: 90 mustang   June 10th 2012, 2:45 pm

For krusty. Yes i know its got a flat tire, luckly its just a spare set of rims and tires i had laying around













Pa super comp c4 and FTI TC, 3800 stall

Back to top Go down
CRUSH
Admin
Admin
avatar

Number of posts : 3512
Location : ON A STREET NEAR YOU
Registration date : 2009-01-30

PostSubject: Re: 90 mustang   June 10th 2012, 4:16 pm

Cool

_________________
   Cool  Cool  Cool  Cool I'TS ONLY A 3.0 WITH A LITTLE TURBO  Cool  Cool  Cool  CoolCRUSH HAS GOT YOU COVERED.....
Back to top Go down
handofdoom11/BANNED
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 304
Registration date : 2011-01-10

PostSubject: Re: 90 mustang   June 10th 2012, 4:22 pm

Meh
Back to top Go down
fatboyyyy
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 394
Age : 25
Registration date : 2011-12-23

PostSubject: Re: 90 mustang   June 10th 2012, 4:24 pm

jizz Jerkit what motor are you planning on putting in?
Back to top Go down
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   June 10th 2012, 4:28 pm

351 svo block stroked to a 388, 13:1 CR with a 350 shot on it
Back to top Go down
fatboyyyy
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 394
Age : 25
Registration date : 2011-12-23

PostSubject: Re: 90 mustang   June 10th 2012, 4:43 pm

affraid track? O.o
Back to top Go down
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   June 10th 2012, 4:44 pm

fatboyyyy wrote:
affraid track? O.o

Yep, building it for Ultimate Street
Back to top Go down
fatboyyyy
Professional Street Racer
Professional Street Racer
avatar

Number of posts : 394
Age : 25
Registration date : 2011-12-23

PostSubject: Re: 90 mustang   June 10th 2012, 5:02 pm

Good luck with the build boss
Back to top Go down
OrlandoEvoIX

avatar

Number of posts : 16
Registration date : 2012-06-15

PostSubject: Re: 90 mustang   June 19th 2012, 3:04 pm

Nice build
Back to top Go down
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   July 7th 2012, 4:05 pm

Picked up a temp engine for it untill i get time to build my 388. Got to replace piston rings and order shaft mounted rockers for it but other then that it a pretty stout engine. 8.2 dart block, 352 ci, 13:1 C/R



Back to top Go down
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   November 17th 2012, 1:52 pm

Might as well update this.

Enigne went to redline to get rebuilt since i flat out dont have time and get the engine plate put in. Bunch of parts ordered for it too, hopefully dennis should be done by the start of dec and i can get the engine and car back.

Double AA k memeber, arm arms, limiters, and wheelie skis


Harland sharp shaft mount rocker arms


Cheetah SCS shifter


CSR water pump and GZ motorsports vaccum pump


MSD digital 7al with datalogging, crank trigger, and coil


and how the car sits up at the shop, motor plate in
Back to top Go down
SoFlaZ06
Newbie
Newbie
avatar

Number of posts : 21
Location : 561
Registration date : 2011-03-03

PostSubject: Re: 90 mustang   February 11th 2013, 3:31 pm

nice build
Back to top Go down
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   February 19th 2013, 10:32 am

Thanks, i will try and get some updated pics of it when i get home. I was putting aerospace brakes on it and ran into nothing but issues with them. The caliper brackets dont fit my racecraft 2" drop spindles and the rear rotor caps needs milling down about .080" so they will work.

Back to top Go down
V6Chris
STREET LEGEND
STREET LEGEND
avatar

Number of posts : 5188
Age : 29
Location : In front of you
Registration date : 2009-01-30

PostSubject: Re: 90 mustang   February 23rd 2013, 3:51 pm

nice valve covers

that thing is going to get killed in ultimate street
Back to top Go down
http://www.crtperformance.webs.com
dropcivic
Intermidate Street Racer
Intermidate Street Racer


Number of posts : 152
Registration date : 2012-05-20

PostSubject: Re: 90 mustang   February 24th 2013, 10:02 pm

V6Chris wrote:
nice valve covers

that thing is going to get killed in ultimate street

Yep, mustang specialties built this engine the first time.

I know this, 5.50-5.60's is just a class filler but it lets me test the car and play with the suspension. Im looking at redoing a bunch of stuff at the end of the year and taking it too trz or double AA and then put a 427 in there

This what i have had a chance to do. Have to say, not liking this aerospace brake kit. Had to massgae the brackets to get them onto the spindles and the rear rotor caps need to be milled down .080" so that the brakes fit



Back to top Go down
SFT_TUNED
Newbie
Newbie


Number of posts : 88
Registration date : 2012-10-08

PostSubject: Re: 90 mustang   March 1st 2013, 8:58 pm

Nice
Back to top Go down
Sponsored content




PostSubject: Re: 90 mustang   

Back to top Go down
 
90 mustang
Back to top 
Page 1 of 1
 Similar topics
-
» Marty the Mustang
» Skyleaders 1/5 Scale Mustang Build
» Don`t know what this little tractor is , but it is SweeeeT!
» Me on TORQUE getting some air XD
» LOL! I have two horses for sale...added a few more :( Update:

Permissions in this forum:You cannot reply to topics in this forum
SOUTHERN KNIGHTS :: MEMBERS :: Members Rides-
Jump to: