Home
looking for a turbo for my stang
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
looking for a turbo for my stang. please no tiny baby turbos. something decently sized for a v8. just let me know the specs on it and how much you want for it. preferably with no internal wastegate but if it does i might be interested if the price and size is right. thanx
Phantom SRT4- STREET KING!
- Number of posts: 1064
Age: 19
Location: Davie, Florida.
Registration date: 2009-02-14
how much power are u looking to make, ill let u know if theres anything sitting around my boys shop that would be compatible with that power.
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
honestly im looking to make about 450-480 i dont want something crazy and my bottom end probly wont handle more than that. but thanx man i apreciate it yeah just let me know
julio- Pro street racer
- Number of posts: 251
Registration date: 2009-08-15
chris actually it will ive seen stock bottom end 5.0s in da 500 to 550 range but then we start getting to da block not holding but studs and girdles will get u there at least to da 600 mark at da flywheel. kinda pushin it but i have seen them doin it and holding it for years.
julio- Pro street racer
- Number of posts: 251
Registration date: 2009-08-15
cafeteras 
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
well i was thinking of taking out the motor any way to paint it real nice and stuff and put a new rear main cuz you no there always leaking and since im doing that im thinking of puttin a girdle in while im at it. i already got studs so thats out of the way
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
julio we should get stickers that say cafeteras with a picture of a cafetera next to it lol
View the profile
V6Chris- STREET KING!
- Number of posts: 1403
Age: 21
Registration date: 2009-01-31
a 60-1 probably be a good size turbo for what your looking for
SC44 would be a bit small and close to maxing but spool very fast
SC44 would be a bit small and close to maxing but spool very fast
_________________
CRT PERFORMANCE/FFS RACING
stay on the path
The south side looked like they were coming correct, til hill side showed up.
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
yeah i would like to start spooling like around 3-3500 rpm and just keep pulling too about redline not like ima shift a redline but too know that i have that power in high rpm
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
something like this http://www.youtube.com/watch?v=ae7u5_mEn4s
1JZ240- Fresh on the scene
- Number of posts: 8
Location: Miami/kendall
Registration date: 2009-10-16
i have a ebay type 67mm turbo
t4 with a .68 rear housing....i used it on my 2.5l 6cyl for like 2-3000 miles and upgraded to a t70
i made 420 hp at 19psi on half the motor and spooled at 4000 on my motor...it would make more power..on less boost and lower rpm...it be a nice cheap turbo to get going...only want $250 for it....great condtion..no smoke when i took it off....no shaft play...lemme know if u would be interested....
Jeff
sc300turbo@aol.com
t4 with a .68 rear housing....i used it on my 2.5l 6cyl for like 2-3000 miles and upgraded to a t70
i made 420 hp at 19psi on half the motor and spooled at 4000 on my motor...it would make more power..on less boost and lower rpm...it be a nice cheap turbo to get going...only want $250 for it....great condtion..no smoke when i took it off....no shaft play...lemme know if u would be interested....
Jeff
sc300turbo@aol.com
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
for shure man i'll let you know im just a little tight on the cash right now. thanx tho
1JZ240- Fresh on the scene
- Number of posts: 8
Location: Miami/kendall
Registration date: 2009-10-16
no problem its just chillin in the garage...no rush/.....the price is right..and its got all the right stuff to upgrade in the future..between the 3in v band ex..T4 footprint and 4in inlet...its the same specs as most turbos u will up grade to....so its a great strting point
flaco1086- street racer
- Number of posts: 125
Age: 23
Location: east hialeah home of the cafeteras
Registration date: 2009-08-17
thanx man i appreciate it. i'll let you know